All articles by Nick Holt – Page 39
-
Article
Jet Edge introduces Milestone 5-axis cutting machine
Jet Edge has introduced the new Milestone 5-axis precision water jet cutting machine. Described as being capable of cutting virtually any material, the Milestone is available in three sizes, 5.5’ x 6.5’ nominal (1,700mm x 2,000mm), 5.5’ x 13’ nominal (1,700mm x 4,000mm) and 6.5’ x 13’ nominal (2,000mm x ...
-
Article
Alup Energy Box for simplified energy recovery
ABAC has developed a new system for recovering waste heat generated by compressed air systems. The Alup Energy Box converts heat generated by air compressors into hot water (up to 70ºC) for industrial processes and HR applications, such as hot water for washrooms. Energy Box is a convenient, easy-to-install system ...
-
Article
Kistler introduces new sensors for injection moulding
Kistler has introduced a range of sensors designed for use in the production of injection-moulded plastics. The new sensors, includng the Type 6188A, which has a front diameter of just 1mm, measure cavity pressure and contact temperature at the same point in the mould. In addition to this sensor, Kistler ...
-
Article
Adhesive application tips from Intertronics
Standard stainless steel needles have a steep pressure restriction in the area where the needle joins the hub.This design requires unnecessarily high pressure to generate flow, while high residual pressure in the needle when feed pressure is cut can cause product to leak from the needle tip.Tapered dispensing needles from ...
-
ArticleTornos introduces new single spindle lathe
The Tornos Sigma 32 is designed for the efficient machining of complex work pieces with a bar diameter over 32mm. Key benefi ts of the Sigma 32 are the identical power ratings of its spindle and counterspindle settings, which allows superior rigidity and stability during machining work. The machine also ...
-
Article
X-Rite introduces new spectrophotometers
X-Rite has launched its MA94, 96 and 98 range of multi-angle spectrophotometers. Featuring the company’s X-ColorQC software (delivered with the units), the new equipment allows automotive suppliers and OEMs to maintain precise colour control in their processes. Based on X-Rite’s MA68II spectrophotometer, data collected with the MA94, MA96 and MA98 ...
-
Article
Chiron introduces the Big Mill 3000
With the introduction of the new Big Mill 3000 series, Chiron says that it is offering a new perspective in the HSK100/SK50-class for heavy cutting of large workpieces. The replacement for the FZ 28, the Big Mill stands out due to reduced changeover times in combination with robust milling properties.The ...
-
Article
Romer Absolute Arm with integrated laser scanner
Hexagon Metrology has introduced the Romer Absolute Arm, which now features an integrated and fully-certifi ed laser scanner.A universal scanning solution, the versatile system can be used to scan all types of parts. Featuring a semi-automatic laser power control, the scanner can work with different surface types without the need ...
-
ArticleArco launches new hearing protection device
Most traditional hearing protection devices are designed to block all sound, meaning that users must remove this equipment to hear spoken directions, risking exposure to potentially damaging noise levels. To solve this problem, Arco has launched a hearing protection system that incorporates the groundbreaking Speech Enhancing Noise Suppression (SENS) technology ...
-
ArticleThe next frontier of smarter transportation
Opportunities for automakersConnectivity: The driving forceThinking outside the vehicleAMS has had exclusive access to a recent global study of automotive executives’ opinions that offers a fascinating insight into how the world of personal mobility will change over the next decade, and how the industry needs to respond.The automotive sector accounts ...
-
ArticleLittle wonder in Brussels
Preparing for productionMeasurement testingQuality productSpecification detailsAward-winning environmental managementAudi has invested approximately €300m to upgrade a former Volkswagen plant for production of the new A1 premium small car. The first plant on the current site of what is now known as Audi Brussels was called Anciens Etablissements D’leteren Frères, the name ...
-
ArticleEditor's Note: Part of the solution
In this November-December 2010 issue, we take a look at the role of Tier suppliers and how they have developed the manufacturing processes behind four radically different products; convertible car top systems, interior electronic components, hybrid drivetrain systems and turbochargers.While OEMs are looking to reclaim ownership of previously out-sourced part ...
-
ArticleNew hybrid solution from GKN
System designUnit production and installationWith more than 40 facilities in 30 countries, GKN Driveline commands approximately 40% of the automotive driveshaft market. The company’s latest technology involves development of the hybrid system that will feature on upcoming Peugeot models.Peugeot is set to launch production of its hybrid model range under ...
-
ArticleWheels of fortune
Ball-bearing technologyProduction process Final testingBall-bearing switchAMS takes a look at production of the new Honeywell turbochargers that feature ballbearing technology, examining the relationship between the company’s turbo and aerospace divisions and how this benefits production.Place a jet engine and a turbocharger side by side and there is no apparent connection ...
-
ArticleBuilding in value
CMOS production and applicationVehicle integrationBusiness modelFuture perfectGentex Corporation's product range, the process behind bringing these technologies to market, and what the company is planning in terms of future product developmentsThe first examples of auto-dimming rearview mirrors were electro-mechanical devices, meaning they featured automated operation of the manual anti-dazzle setting. A ...
-
ArticlePush the button
Production processFinal assemblyPossible savingsHow Magna Car Top Systems in Stuttgart develops, produces and delivers convertible roof systems for OEM carmakersMagna Car Top Systems (CTS) has a series of global production facilities, but its largest plant is located near Stuttgart, Germany in Korntal-Münchingen. The company, which became part of Magna Steyr ...
-
ArticleNew renewable honing oil from Sunnen
Sunnen has introduced its SHO-500 honing oil, a petroleum-free, general-purpose fl uid based on a renewable vegetable formulation that makes sustainable metalworking affordable and practical. Offering a breakthrough in oxidation stability, SHO-500 is formulated without additives such as sulphur, chlorine and fl uorine. The new fl uid is suitable for ...
-
ArticleReplacement filters from Hi-line
The new Filtersoft range of cartridge fi lters from Hi-line Industries are claimed to offer savings of up to 75% over comparable products, without compromising build quality, performance or anticipated service life. Filters can be supplied for use with a wide range of fl uids, including compressed air, gases, process ...
-
Article
New Tornos Almac CU 1007 machining centre
Tornos has introduced its Almac CU 1007 machining centre, with optional 6-axis robot. A cast iron housing with four linear guide rails fi xed on a prism and 1/10μm incremental glass scales ensures excellent fi nishing on all machined parts. Travels are 8.66” x 4.72” x 9.06” (X/Y/Z) with a ...
-
ArticleKistler launches its new S220 rolling resistance tool
The new S220 two-component measuring hub from Kistler uses strain gauge technology to measure changes in tyre rolling resistance in very close proximity to the tyre footprint. The new measuring hub also allows static measurement of the contact force and control of the test stand. Unlike torque and power measurements ...